Azden PRO-XD 2.4 GHz Digital Wireless Microphone System


For Camcorders, Mobile Devices, & DSLRs
2.4 GHz Frequency Bandwidth
Auto Frequency Scan and Sync
Over 100′ Range
Mic and Headphone Outputs on Receiver
Transmitter with Line and Mix Inputs
Rechargeable Lithium-Ion Batteries
Includes Mini Output Cable
Includes USB Cable and Charger

R5,400.00 Inc. VAT

The PRO-XD from Azden is a 2.4 GHz digital wireless lavalier system that has over a 100′ range with automatic frequency scan and sync capabilities. It can be used to capture audio in several environments for applications such as camcorders, DSLR, mobile devices, recorders, and more.

The PRO-XD system features a PRO-XDT bodypack transmitter, a PRO-XDR camera-mount receiver, and an EX-503XD lavalier microphone. The receiver is built with mic and headphone output jacks. The bodypack transmitter includes a line level jack and a mixed input jack to allow for several source options.

The PRO-XD’s transmitter and receiver are powered by internal lithium-ion batteries, and each can operate for over 10 hours when fully charged. In addition, up to four systems can be used simultaneously with no interference.

Finally, set up is a breeze with automatic syncing between receiver and transmitter. The EX-503XD lavalier microphone features an omnidirectional polar pattern with a frequency response of 30 Hz to 20 kHz. The PRO-XD system also includes an 1/8″ mini-output cable, a USB cable, a lapel clip, a shoe mount, and a battery charger.

Operates in 2.4 GHz wireless range, which is completely free of TV and radio interference
48 kHz/16-bit digital audio quality
Mobile device compatible
Rechargeable internal batteries will run for approximately 10 hours
Wide frequency response and low internal noise
Headphone monitor output
Line in aux input
SKU: AZD-PROXD Categories: , Product Brand:

Operating Frequency 2.4 GHz ISM band
Dynamic Range 90 dB
Signal to Noise 80 dB
Operating Range 115′ / 35 m typical; up to 394′ / 120 m in ideal conditions
Frequency Response 20 Hz – 20 kHz, ± 1 dB
Digital Sampling 16-bit/48 kHz
System Latency 14 ms
Battery Life 300 cycles
Battery Type Lithium-ion
Power Supply USB 5 V
RF Output Power 10 mW
Maximum Output Level -14 dBV
Mic Output 1/8″ / 3.5 mm dual-mono/stereo
Headphone Output 1/8″ / 3.5 mm stereo
Output Impedance Mic: 600 ohms
Headphone: 16 ohms
Battery Life 16 hours
Battery Charge Time 3 hours
Dimensions (W x H x D) 1.9 x 3.1 x 0.6″ / 48 x 79 x 14 mm
Weight 2.4 oz / 68 g
RF Output Power 10 mW
Mic Input 3.5 mm mono TRRS
Aux Input 1/8″ / 3.5 mm stereo, line level
Input Impedance Mic: 2.2 kOhms
Aux: 10 kOhms
Maximum Input 300 mV RMS
Battery Life 11 hours
Dimensions (W x H x D) 1.9 x 3.1 x 0.6″ / 48 x 79 x 14 mm
Weight 2.2 oz / 62 g
Microphone Element Electret condenser
Polar Pattern Omnidirectional
Frequency Response 30 Hz to 20 kHz
Sensitivity -46 dB at 1 kHz (0 dB=1 V/Pa)
Impedance 2.2 kOhms (at 1 kHz)
Power Requirement Plug-in power 1-10 VDC
Connector Type 1/8″ / 3.5 mm TRRS
Cord Length 41″ / 105 cm
Packaging Info
Package Weight 0.81 lb
Box Dimensions (LxWxH) 7.45 x 5.5 x 2.1″


Call Now ButtonCall Now: +27 11 706 7081